Cost of Concrete in Melbourne (2025 Price Guide)
Concrete driveway installation in Melbourne costs $90–$160 per sqm for a plain broom finish. Exposed aggregate runs $130–$220 per sqm. Stamped concrete costs $160–$280 per sqm. A standard double driveway (50 sqm) runs $5,000–$11,000.
Concrete work in Melbourne is best from spring through autumn — winter pours risk frost damage in outer suburbs and slow curing. Always specify a 32 MPa minimum mix for exterior slabs. Reinforcement (mesh or fibre), control joints, and curing affect long-term durability. Driveway crossover work that touches the council nature strip requires a Council Crossing Permit.
Concreting Costs in Melbourne
| Service | Low | High |
|---|---|---|
| Plain concrete driveway (per sqm) | $90 | $160 |
| Exposed aggregate driveway (per sqm) | $130 | $220 |
| Stamped concrete (per sqm) | $160 | $280 |
| Concrete path (per linear m, 1m wide) | $120 | $220 |
| Patio slab (per sqm) | $100 | $180 |
| Council crossover (per sqm) | $200 | $350 |
| Garage floor resurface | $1,800 | $5,000 |
All prices are approximate estimates in Australian dollars (AUD) for the Melbourne metropolitan area. Always get written quotes before committing.
Licensing & Insurance in Victoria
Concreters in Victoria don't require a specific trade licence. However, concreting connected to a structural building (slab footings, foundations) must be done under a VBA-registered Builder's supervision and is subject to a Building Permit and inspections. Driveway crossovers — where the driveway meets the road — require a Council Crossing Permit and must be built to council specification. Confirm the contractor carries public liability and current WorkCover.
Frequently Asked Questions
- When can concrete be poured in Melbourne?
- Concrete work in Melbourne is best from October through May when temperatures stay above 5°C overnight. Winter pours need accelerating admixtures and frost protection in outer suburbs. Avoid pouring when overnight lows are forecast below 2°C or when heavy rain is expected within 24 hours.
- How much does a concrete driveway cost in Melbourne?
- A plain broom-finish concrete driveway in Melbourne costs $90–$160 per sqm installed. A standard double driveway of 50 sqm runs $4,500–$8,000. Exposed aggregate adds 50% to the base; stamped concrete is $160–$280 per sqm.
- Does a new driveway need a permit in Melbourne?
- Driveway replacement on your own property typically doesn't need a permit. However, a Council Crossing Permit is required for the crossover (where the driveway meets the kerb) — this work must be done by a council-approved concreter to council specification. Your contractor handles the permit application.
- How long does concrete last in Melbourne's climate?
- Well-installed concrete in Melbourne lasts 30–50 years with proper care. Key factors are using 32 MPa+ mix, proper thickness (100mm+ for driveways), reinforcement (mesh or fibre), control joints to manage cracking, and sealing every 3–5 years to prevent staining and surface erosion.
Find Concreting Contractors in Melbourne
Browse verified concreting businesses in Melbourne. Contact them directly — no booking fees or middlemen.
Browse Concreting in Melbourne →Related Melbourne cost guides
Fencing costs in Melbourne
Treated pine fence installation in Melbourne costs $90–$180 per linear metre installed. A standard residential fence of 30 linear metres runs $2,700–$5,400. Hardwood paling fencing averages $150–$280 per metre. Colorbond steel fencing is $90–$180 per metre.
Other Trades costs in Melbourne
Home service trade costs in Melbourne vary by specialist. Appliance repair runs $130–$400. Plaster repair averages $250–$900. Garage door service costs $180–$550. Always get at least two written quotes and verify insurance.
Plumbing costs in Melbourne
A licensed plumber in Melbourne charges $100–$160 per hour during business hours. Emergency callouts run $150–$300 plus labour. Drain clearing averages $180–$400 and hot water unit replacement costs $1,200–$3,500 installed.