Cost of Flooring in Melbourne (2025 Price Guide)
Flooring installation in Melbourne runs $80–$150 per sqm for hybrid plank, $130–$220 for engineered timber, and $130–$280 for tile — fully installed. Hybrid plank is the most popular choice for renovations due to its waterproof core and quick install.
Melbourne's seasonal humidity swing (very dry in summer, damp in winter) means flooring choice matters. Engineered timber and hybrid (SPC) flooring both handle Melbourne's humidity better than solid timber. Underlay and acoustic rating matter in apartments — most strata bylaws require an underlay rated for impact noise. Subfloor preparation is critical and often quoted separately.
Flooring Costs in Melbourne
| Service | Low | High |
|---|---|---|
| Hybrid plank (SPC) installed | $80/sqm | $150/sqm |
| Laminate flooring installed | $60/sqm | $110/sqm |
| Engineered timber installed | $130/sqm | $220/sqm |
| Solid timber installed | $180/sqm | $300/sqm |
| Porcelain tile installed | $130/sqm | $280/sqm |
| Carpet installed | $60/sqm | $160/sqm |
| Subfloor preparation | $400 | $2,500 |
All prices are approximate estimates in Australian dollars (AUD) for the Melbourne metropolitan area. Always get written quotes before committing.
Licensing & Insurance in Victoria
Flooring contractors in Victoria don't need a trade licence. Tilers may hold a Certificate III in Wall and Floor Tiling. Confirm the installer carries public liability insurance and current WorkCover. Major subfloor work (slab repair, structural levelling) connected to a renovation may require a Building Permit — your contractor should advise.
Frequently Asked Questions
- What flooring is best for Melbourne homes?
- Engineered timber and hybrid (SPC) plank are the best choices for Melbourne. Both handle the humidity swing without warping. Hybrid is waterproof — preferred for kitchens, bathrooms, and ground floors. Solid timber works in living areas with stable conditions but isn't suitable for wet areas.
- How much does hybrid plank flooring cost in Melbourne?
- Hybrid (SPC) plank installation in Melbourne costs $80–$150 per sqm installed including underlay. A 50 sqm living area runs approximately $4,000–$7,500 fully installed. Higher-end ranges with thicker wear layers cost more but last longer in high-traffic homes.
- How long does flooring installation take?
- A typical residential install in Melbourne takes 1–3 days. Tile work takes longer due to adhesive and grout curing — usually 4–7 days for a full bathroom or kitchen. Most flooring contractors include removal and disposal of existing floors — confirm before signing.
- Do I need to consider acoustic rating in an apartment?
- Yes. Most Owners Corporations and strata bylaws in Melbourne require an underlay with a minimum impact-noise rating (often Lnt,w of 50 or lower). Confirm the spec with your OC manager before quoting — non-compliant flooring can be ordered to be removed at your cost.
Find Flooring Contractors in Melbourne
Browse verified flooring businesses in Melbourne. Contact them directly — no booking fees or middlemen.
Browse Flooring in Melbourne →Related Melbourne cost guides
Cleaning costs in Melbourne
Regular house cleaning in Melbourne costs $120–$280 per visit for a standard home. One-off deep cleans run $250–$550. End-of-lease (bond clean) cleaning averages $300–$700 depending on home size and condition.
Moving costs in Melbourne
Local moves in Melbourne cost $130–$200 per hour for a 2-person crew with a truck. A standard 3-bedroom home averages $700–$2,000 for a local move. Interstate moves are priced by cubic metre or backloading rates.
Pest Control costs in Melbourne
A single pest control treatment in Melbourne costs $180–$450. Annual termite inspections run $250–$600. Termite treatment averages $2,500–$7,000 depending on chemical or bait system used. Wasps, ants, spiders are typically $200–$400 per visit.